The PTH123G35AXXX is for commercial or residential use with 208 / 230 volts. Featuring 12000 BTUs of cooling power, an 11300 / 11500 BTU heat pump and a 3 / 3.5 kW electric heater with an included 20 amp power cord with an EER of 11.0, this unit will cool a space that is about 300 - 525 sq. ft. The electric heater will provide approximately 9900 / 12000 BTUs of electric backup heat.
The quality construction of Amana PTACs and the two fan motor design, help this unit boast an STC (Sound Transmission Class) of 28. With such quiet operation, you and your guests will enjoy the quiet you look forward to for a restful night's sleep. American-made, easy to install, easy to use, and built to last, Amana’s line of PTAC air conditioners offer a smart and efficient way to get year round comfort.
Amana PTAC units help to maximize your room with a shallow 7 5/8" front extension into the room. The Stonewood Beige color will blend seamlessly into any space. Amana PTACs are installed through the wall. The front panel can be attached to the frame with a concealed screw. This helps circumvent unauthorized tinkering with the unit.
The 7-button touch pad with LED display is easy to see and use. It allows for fan and mode control and easy-touch up and down temperature setting. Integrated diagnostic tools are included for fast diagnosis and repair. These units allow for easy connection to a wireless or wired thermostat as well as the ability to integrate with an energy management system.
Amana’s advanced condensate dispersion system throws excess condensation onto the outdoor coil for fast evaporation allowing for maximum cooling efficiency with limited condensate run-off. The built-in 30-second fan-off delay allows for more cooling efficiency, using the unit’s fan to disperse the heated or cooled air into the room after the compressor stops, instead of leaving the conditioned air on the coils.
Each unit also comes equipped with Room Freeze Protection that activates the fan motor and the electric resistance heater when the PTAC senses temperatures of 40°F or below.
An increased dehumidification capacity (3.6 pints per hour) works to maintain lower humidity levels in the room. This makes it more comfortable at higher temperatures, ultimately reducing cooling costs, while still allowing you to feel comfortable.
Easily accessible filters are removable and washable to help maintain clean and healthy air in the room. All units are run tested at the factory before shipping. They are also leak tested during manufacturing and again prior to shipping.
New installations require a sleeve and a rear grille. These items are not included with the air conditioner. Fits a standard PTAC Sleeve Size (WxHxD): 42" x 16 1/16" x 14 1/8". The cut-out dimensions for this unit are 42-1/4"w x 16-1/4"h.
Amana had multi-unit installations in mind when creating their PTACs. Out of the box these units can be setup to have temperature limiting giving you the control over the maximum and minimum temperatures in the space all while allowing your guest to select any temperature they want. This prevents over heating and over cooling saving you money. With the added wireless adapter the unit can be connected to a wireless thermostat and a room occupancy sensor. These allow for automatic setback rules to be created when no motion is detected.
The optional RF Antenna paired with the DigiSmart controller allow you to really take control of your PTAC units. This system gives you site-wide PTAC configuration options, site wide PTAC diagnostics, a front desk system interface, and email reporting all through an easy to use web interface. You can save up to 35% by reducing energy usage with the DigiSmart system!